Aug. 3, 2015, 9:30 p.m.

AVR

EEPROM, Atmega

Microcontrollers AVR Atmega48 / 88/168/328 contain the EEPROM memory of 256/512/512 / 1K bytes , respectively. EEPROM in AVR microcontrollers can support up to 100,000 write cycles. Access to non-volatile memory is carried out through three types of registers:

  • EEARH, EEARL - registers the addressing of memory cells. In case Atmega48 EEARH absent, because in this type of microcontroller 256 is present in all memory cells. EEARH responsible for the high byte of memory address, EEARL for the least significant byte;
  • EEDR - register for writing and reading data;
  • EECR - register control, this register is setting the actions to be performed with the memory.
Aug. 3, 2015, 5:28 a.m.

Fiber Optic Transmission Lines

fiber, волс, компоненты

Passive Components Fiber-optic communication lines are divided into the following types:

  • optic connectors and splitters;
  • optical converters;
  • optical isolators;
  • optical switches.

Splitters

The most important passive components are FOL optic connectors and splitters, which are used for consolidation or separation of optical signals.

Functional diagram of the splitter
Aug. 2, 2015, 5:18 a.m.

Fiber Optic Transmission Lines

fiber, волс, монтаж

Installation of couplings

Mounting of couplings shall be in accordance with installation instructions for the particular type of coupling of the manufacturer (supplier) couplings. Connection of optical fiber mounting couplings should be carried out under the control of the welding method of attenuation OTDR. The value of a welded joint fiber attenuation, calculated in the direction A - B, B - A, should not exceed 0.1 dB. Each coupling after installation should be the marked sheet of lead or plastic ring tag. Each mounted clutch must be drawn up in duplicate passport. One copy is placed in the sleeve, the second is attached to the as-built documentation. If it provided by the project, and then the optical coupling OK stock placed in a specially made case, which must be secured to the support.

On the local communication networks, mainly to be used optical coupling of domestic manufacturers, designed to meet current technical requirements and compliance with the declaration of the Ministry of Information Technologies and Communications of the Russian Federation. Is allowed to use on the local networks of optical coupling of the foreign producers if the certificate of conformity and standard solutions for installation, mounting and protection of optical couplers in their places of assembly.

Optical Coupler for armored OK, laid in the ground, should ensure that:

  • the ability to electrically connect the screens or metal power elements matched OC structural elements of at least 2.5 mm2;
  • the ability to lead wires of the metallic elements construction OC, separately for each OC to connect to an external ground.
Aug. 1, 2015, 5 a.m.

Fiber Optic Transmission Lines

fiber, волс, конструкция

Introduction

Currently, the Russian market is widely featured products, both domestic and foreign manufacturers of optical couplings for installation of cables. Widely known and used clutch of such manufacturers as: Raychem (Belgium), Reichle & DeMassari (Switzerland), RXS / Simens (Germany), ZM (USA), Fujikura (Japan), Ericsson (Sweden), the Nokia (Finland), AT & T (USA), Pirelli (Italy), Alcatel (Germany).

These companies provide a wide choice of all types of couplings each customer to solve any problem. Along with the delivery of the coupling component manufacturers of the necessary additional accessories such as brackets, housings, additional accessories and consumables items. Deliver them also the necessary equipment and tools, including even the tables of the installation work.

July 30, 2015, 9:06 p.m.

Android

Android, read, write, file

Read and write operations to file are standard functionality of any applications that are logging the events, work with files, up to the transfer of data over the network. In this article, we consider methods of recording information in the files, and read from a file recorded line.

Project structure

Esthetic changes to the standard buttons or ListView will not be made in this lesson, since we work with what is hidden from the eyes of the user, namely, to work with files.

The entire structure of the project respectively is at this time only one class: MainActivity

Also, the project contains the following resource files:

  1. activity_main.xml
  2. strings.xml
  3. styles.xml - in the file does not have any changes relating to a project.
July 30, 2015, 3:49 a.m.

Data Transmission Technologies

виртуальный канал, дейтаграммная передача, коммутация каналов, коммутация пакетов, составной канал, элементарный канал

Circuit switching and packet - it's methods for solving the generalized problem of switching data in any network technology. Complex technical solutions of the generalized switching tasks in its entirety consists of the particular problems of data transmission networks.

By the special problems of data networks include:

  • define flows and appropriate routes;
  • fixation route configuration parameters, and tables of network devices;
  • recognition flows and data transfer between one device interface;
  • multiplexing / demultiplexing streams;
  • separation medium.
July 29, 2015, 4:47 a.m.

Fiber Optic Transmission Lines

fiber, волс, монтаж

Basic concepts and definitions

The most responsible operation in the process of construction of fiber-optic, predetermining the quality and range is the installation of optical fibers. Such a combination of fibers and installation cables are produced in the manufacturing process as well as during the construction and operation of cable lines.

Installation is divided into permanent (fiber welding) and temporary (plug connectors). Fiber optic connectors typically are valves designed for adjusting and fixing the fibers to be connected, as well as mechanical protection for the splice.

The main requirements for connectors are:

  • simple structure;
  • small transient loss;
  • resistance to external mechanical and climatic influences;
  • reliability;
  • In addition to the detachable connectors are required constancy of parameters during re-docking.

Insertion loss connection of optical fibers in a cable transmission path, are divided into external and internal.

External referred to the losses associated with the features of the connection method, including the preparation of the ends of optical fibers, and comprising lateral displacement of the core, diversity ends, the slope of the axes, the angle of the fiber end face, the Fresnel reflection.

I nternal losses are associated with the properties of the resulting optical fiber and, for example, variations in core diameter, numerical aperture, the refractive index profile, netsirkulyarnostyu core Concentricity core and cladding.

July 28, 2015, 3:56 a.m.

Fiber Optic Transmission Lines

fiber, волс, ВОК

Classification of fiber optic cables

Fiber-optic cables (FOC) - a cable products, containing a number of optical fibers and the reinforcing member enclosed in a common envelope, on top of which, depending on the operating conditions of the protective cover can be imposed.

Fiber-optic cables are classified by purpose and conditions of use, as shown in the figure below.

Since FOC less durable than electric cables, they must be protected from the harmful effects of the environment and human activities, which include mechanical stress (tension, bending, compression, torsion, shock, vibration); temperature changes; water penetration.

July 27, 2015, 3:32 a.m.

Data Transmission Technologies

Кампусные сети, корпоративная сеть, сеть отдела, сеть предприятия, сеть рабочей группы

Introduction

Corporate Network - a network whose primary purpose is to maintain the operation of a particular enterprise that owns this network. Corporate network users are the only employees of the company.

In contrast to the prodier networks, enterprise networks, in general, do not render services to third parties or users.

Local networks of end-users are included in the corporate network. The names of the structural units of the corporate network reflect not only the territory of coverage, but also the organizational structure of the enterprise. So, we decided to share a corporate network on a network of divisions and working groups, building a network, campus network backbone.

July 27, 2015, 3:21 a.m.

Data Transmission Technologies

Стандартизация, ЛВС, ШПД

Standardization and sources of standards

Universal argument about the benefits of standardization, which is valid for all industries, computer networks is of particular importance. The essence of the network - the connection of various equipment, and therefore there is a problem of compatibility of the most critical one. Without coordination by all producers generally accepted standards for the equipment and protocols progress in the "construction" of networks would be impossible. Therefore, all the development of the computer industry is ultimately reflected in the standards - any new technology only assumes a "legal" status, where its content is fixed in the relevant standard.

AS
July 22, 2019, 4:32 p.m.
Aleksandr Spiridonov

C++ - Test 001. The first program and data types

  • Result:46points,
  • Rating points-6
AS
July 22, 2019, 4:21 p.m.
Aleksandr Spiridonov

Qt - Test 001. Signals and slots

  • Result:73points,
  • Rating points1
July 22, 2019, 10 a.m.
Pavel K.

C++ - Test 006. Enumerations

  • Result:50points,
  • Rating points-4
Last comments
July 21, 2019, 6:03 a.m.
Evgenij Legotskoj

да, наверное, 32-х разрядную поддержку уже давно поа было выкинуть. К слову, у вас много проектов под Android? Часто много где вижу вопросы о том, пишет ли кто-то вообще на Qt под мобильные сист…
July 20, 2019, 2:41 p.m.
Andrej Jankovich

Очень полезная информация, увы уже выкинул поддержку 32 битных бедняг.
July 20, 2019, 9:31 a.m.
Mihailll

Вот так qDebug()<<"position:"<<event->scenePos();
July 20, 2019, 8:49 a.m.
Mihailll

Добрый день. Как можно узнать координату на графической сцене при отпускании клавиши мыши?
Now discuss on the forum
July 22, 2019, 10:50 a.m.
Pavel K.

Благодарю.Буду пробовать.
July 22, 2019, 10:10 a.m.
Pavel K.

Скорее всего в коде не правильно потоки используются. на форуме пишут кое что интересное - https://stackoverflow.com/questions/18112027/qt-5-1-qml-property-through-threads
July 22, 2019, 3:58 a.m.
Evgenij Legotskoj

Добрый день! Нужен совет сообщества по разработке функционала проверки орфографии. Одна из идей - добавить проверку орфографии при наборе текста статей. Полагаю, что наиболее аде…
July 22, 2019, 3:01 a.m.
Evgenij Legotskoj

Возможно, если при сохранении файла установить права доступа на файл. Что-то такое должно быть у QFile
Looking for a Job?
5,000.00 руб. - 15,000.00 руб.
Дизайнер
Moskovskiy, Moscow, Russia
25,000.00 руб. - 30,000.00 руб.
Разработчик Qt/C++
Barnaul, Altai Krai, Russia

For registered users on the site there is a minimum amount of advertising

EVILEG
About
Services
Join us
© EVILEG 2015-2019
Recommend hosting TIMEWEB