c
cordsacҚар. 9, 2017, 7:04 Т.Ж.

How can I implement this project for design Oval shape

qt, c++, oval

I am trying to implement an oval shape like this project .so I inherited Oval Graphics Item from QGraphicsEllipseItem and QObject, and implement logic,same as logic for Rectangle.here is my oval.cpp code,But my project is not working properly.can you explain how can I solve this and,what I need to do.what I did wrong.here with I attached I tested code.please help me sir..

#include "oval.h"
#include <QPainter>
#include <QDebug>
#include <QCursor>
#include <QGraphicsScene>
#include <QGraphicsSceneMouseEvent>
#include <QGraphicsEllipseItem>
#include <math.h>
#include <dotsignal.h>


static const double Pi = 3.14159265358979323846264338327950288419717;
static double TwoPi = 2.0 * Pi;

static qreal normalizeAngle(qreal angle)
{
    while (angle < 0)
        angle += TwoPi;
    while (angle > TwoPi)
        angle -= TwoPi;
    return angle;
}

oval::oval(QObject *parent) :
    QObject(parent),
    m_cornerFlags(0),
    m_actionFlags(ResizeState)
{
    setAcceptHoverEvents(true);
    setFlags(ItemIsSelectable|ItemSendsGeometryChanges);
    for(int i = 0; i < 8; i++){
        cornerGrabber[i] = new DotSignal(this);
    }
    setPositionGrabbers();
}

oval::~oval()
{
    for(int i = 0; i < 8; i++){
        delete cornerGrabber[i];
    }
}

QPointF oval::previousPosition() const
{
    return m_previousPosition;
}

void oval::setPreviousPosition(const QPointF previousPosition)
{
    if (m_previousPosition == previousPosition)
        return;

    m_previousPosition = previousPosition;
    emit previousPositionChanged();
}

void oval::setRect(qreal x, qreal y, qreal w, qreal h)
{
    setRect(QRectF(x,y,w,h));
}

void oval::setRect(const QRectF &rect)
{
    QGraphicsEllipseItem::setRect(rect);
    if(brush().gradient() != 0){
        const QGradient * grad = brush().gradient();
        if(grad->type() == QGradient::LinearGradient){
            auto tmpRect = this->rect();
            const QLinearGradient *lGradient = static_cast<const QLinearGradient *>(grad);
            QLinearGradient g = *const_cast<QLinearGradient*>(lGradient);
            g.setStart(tmpRect.left() + tmpRect.width()/2,tmpRect.top());
            g.setFinalStop(tmpRect.left() + tmpRect.width()/2,tmpRect.bottom());
            setBrush(g);
        }
    }
}

void oval::mouseMoveEvent(QGraphicsSceneMouseEvent *event)
{
    QPointF pt = event->pos();
    if(m_actionFlags == ResizeState){
        switch (m_cornerFlags) {
        case Top:
            resizeTop(pt);
            break;
        case Bottom:
            resizeBottom(pt);
            break;
        case Left:
            resizeLeft(pt);
            break;
        case Right:
            resizeRight(pt);
            break;
        case TopLeft:
            resizeTop(pt);
            resizeLeft(pt);
            break;
        case TopRight:
            resizeTop(pt);
            resizeRight(pt);
            break;
        case BottomLeft:
            resizeBottom(pt);
            resizeLeft(pt);
            break;
        case BottomRight:
            resizeBottom(pt);
            resizeRight(pt);
            break;
        default:
            if (m_leftMouseButtonPressed) {
                setCursor(Qt::ClosedHandCursor);
                auto dx = event->scenePos().x() - m_previousPosition.x();
                auto dy = event->scenePos().y() - m_previousPosition.y();
                moveBy(dx,dy);
                setPreviousPosition(event->scenePos());
                emit signalMove(this, dx, dy);
            }
            break;
        }
    } else {
        switch (m_cornerFlags) {
        case TopLeft:
        case TopRight:
        case BottomLeft:
        case BottomRight: {
            rotateItem(pt);
            break;
        }
        default:
            if (m_leftMouseButtonPressed) {
                setCursor(Qt::ClosedHandCursor);
                auto dx = event->scenePos().x() - m_previousPosition.x();
                auto dy = event->scenePos().y() - m_previousPosition.y();
                moveBy(dx,dy);
                setPreviousPosition(event->scenePos());
                emit signalMove(this, dx, dy);
            }
            break;
        }
    }
    QGraphicsItem::mouseMoveEvent(event);
}

void oval::mousePressEvent(QGraphicsSceneMouseEvent *event)
{
    if (event->button() & Qt::LeftButton) {
        m_leftMouseButtonPressed = true;
        setPreviousPosition(event->scenePos());
        emit clicked(this);
    }
    QGraphicsItem::mousePressEvent(event);
}

void oval::mouseReleaseEvent(QGraphicsSceneMouseEvent *event)
{
    if (event->button() & Qt::LeftButton) {
        m_leftMouseButtonPressed = false;
    }
    QGraphicsItem::mouseReleaseEvent(event);
}

void oval::mouseDoubleClickEvent(QGraphicsSceneMouseEvent *event)
{
    m_actionFlags = (m_actionFlags == ResizeState)?RotationState:ResizeState;
    setVisibilityGrabbers();
    QGraphicsItem::mouseDoubleClickEvent(event);
}

void oval::hoverEnterEvent(QGraphicsSceneHoverEvent *event)
{
    setPositionGrabbers();
    setVisibilityGrabbers();
    QGraphicsItem::hoverEnterEvent(event);
}

void oval::hoverLeaveEvent(QGraphicsSceneHoverEvent *event)
{
    m_cornerFlags = 0;
    hideGrabbers();
    setCursor(Qt::CrossCursor);
    QGraphicsItem::hoverLeaveEvent( event );
}

void oval::hoverMoveEvent(QGraphicsSceneHoverEvent *event)
{
    QPointF pt = event->pos();              // The current position of the mouse
    qreal drx = pt.x() - rect().right();    // Distance between the mouse and the right
    qreal dlx = pt.x() - rect().left();     // Distance between the mouse and the left

    qreal dby = pt.y() - rect().top();      // Distance between the mouse and the top
    qreal dty = pt.y() - rect().bottom();   // Distance between the mouse and the bottom

    // If the mouse position is within a radius of 7
    // to a certain side( top, left, bottom or right)
    // we set the Flag in the Corner Flags Register

    m_cornerFlags = 0;
    if( dby < 7 && dby > -7 ) m_cornerFlags |= Top;       // Top side
    if( dty < 7 && dty > -7 ) m_cornerFlags |= Bottom;    // Bottom side
    if( drx < 7 && drx > -7 ) m_cornerFlags |= Right;     // Right side
    if( dlx < 7 && dlx > -7 ) m_cornerFlags |= Left;      // Left side

    if(m_actionFlags == ResizeState){
        QPixmap p(":/icons/arrow-up-down.png");
        QPixmap pResult;
        QTransform trans = transform();
        switch (m_cornerFlags) {
        case Top:
        case Bottom:
            pResult = p.transformed(trans);
            setCursor(pResult.scaled(24,24,Qt::KeepAspectRatio));
            break;
        case Left:
        case Right:
            trans.rotate(90);
            pResult = p.transformed(trans);
            setCursor(pResult.scaled(24,24,Qt::KeepAspectRatio));
            break;
        case TopRight:
        case BottomLeft:
            trans.rotate(45);
            pResult = p.transformed(trans);
            setCursor(pResult.scaled(24,24,Qt::KeepAspectRatio));
            break;
        case TopLeft:
        case BottomRight:
            trans.rotate(135);
            pResult = p.transformed(trans);
            setCursor(pResult.scaled(24,24,Qt::KeepAspectRatio));
            break;
        default:
            setCursor(Qt::CrossCursor);
            break;
        }
    } else {
        switch (m_cornerFlags) {
        case TopLeft:
        case TopRight:
        case BottomLeft:
        case BottomRight: {
            QPixmap p(":/icons/rotate-right.png");
            setCursor(QCursor(p.scaled(24,24,Qt::KeepAspectRatio)));
            break;
        }
        default:
            setCursor(Qt::CrossCursor);
            break;
        }
    }
    QGraphicsItem::hoverMoveEvent( event );
}

QVariant oval::itemChange(QGraphicsItem::GraphicsItemChange change, const QVariant &value)
{
    switch (change) {
    case QGraphicsItem::ItemSelectedChange:
        m_actionFlags = ResizeState;
        break;
    default:
        break;
    }
    return QGraphicsItem::itemChange(change, value);
}


void oval::resizeLeft(const QPointF &pt)
{
    QRectF tmpRect = rect();
    // if the mouse is on the right side we return
    if( pt.x() > tmpRect.right() )
        return;
    qreal widthOffset =  ( pt.x() - tmpRect.right() );
    // limit the minimum width
    if( widthOffset > -10 )
        return;
    // if it's negative we set it to a positive width value
    if( widthOffset < 0 )
        tmpRect.setWidth( -widthOffset );
    else
        tmpRect.setWidth( widthOffset );
    // Since it's a left side , the rectange will increase in size
    // but keeps the topLeft as it was
    tmpRect.translate( rect().width() - tmpRect.width() , 0 );
    prepareGeometryChange();
    // Set the ne geometry
    setRect( tmpRect );
    // Update to see the result
    update();
    setPositionGrabbers();
}

void oval::resizeRight(const QPointF &pt)
{
    QRectF tmpRect = rect();
    if( pt.x() < tmpRect.left() )
        return;
    qreal widthOffset =  ( pt.x() - tmpRect.left() );
    if( widthOffset < 10 ) /// limit
        return;
    if( widthOffset < 10)
        tmpRect.setWidth( -widthOffset );
    else
        tmpRect.setWidth( widthOffset );
    prepareGeometryChange();
    setRect( tmpRect );
    update();
    setPositionGrabbers();
}

void oval::resizeBottom(const QPointF &pt)
{
    QRectF tmpRect = rect();
    if( pt.y() < tmpRect.top() )
        return;
    qreal heightOffset =  ( pt.y() - tmpRect.top() );
    if( heightOffset < 11 ) /// limit
        return;
    if( heightOffset < 0)
        tmpRect.setHeight( -heightOffset );
    else
        tmpRect.setHeight( heightOffset );
    prepareGeometryChange();
    setRect( tmpRect );
    update();
    setPositionGrabbers();
}

void oval::resizeTop(const QPointF &pt)
{
    QRectF tmpRect = rect();
    if( pt.y() > tmpRect.bottom() )
        return;
    qreal heightOffset =  ( pt.y() - tmpRect.bottom() );
    if( heightOffset > -11 ) /// limit
        return;
    if( heightOffset < 0)
        tmpRect.setHeight( -heightOffset );
    else
        tmpRect.setHeight( heightOffset );
    tmpRect.translate( 0 , rect().height() - tmpRect.height() );
    prepareGeometryChange();
    setRect( tmpRect );
    update();
    setPositionGrabbers();
}

void oval::rotateItem(const QPointF &pt)
{
    QRectF tmpRect = rect();
    QPointF center = boundingRect().center();
    QPointF corner;
    switch (m_cornerFlags) {
    case TopLeft:
        corner = tmpRect.topLeft();
        break;
    case TopRight:
        corner = tmpRect.topRight();
        break;
    case BottomLeft:
        corner = tmpRect.bottomLeft();
        break;
    case BottomRight:
        corner = tmpRect.bottomRight();
        break;
    default:
        break;
    }

    QLineF lineToTarget(center,corner);
    QLineF lineToCursor(center, pt);
    // Angle to Cursor and Corner Target points
    qreal angleToTarget = ::acos(lineToTarget.dx() / lineToTarget.length());
    qreal angleToCursor = ::acos(lineToCursor.dx() / lineToCursor.length());

    if (lineToTarget.dy() < 0)
        angleToTarget = TwoPi - angleToTarget;
    angleToTarget = normalizeAngle((Pi - angleToTarget) + Pi / 2);

    if (lineToCursor.dy() < 0)
        angleToCursor = TwoPi - angleToCursor;
    angleToCursor = normalizeAngle((Pi - angleToCursor) + Pi / 2);

    // Result difference angle between Corner Target point and Cursor Point
    auto resultAngle = angleToTarget - angleToCursor;

    QTransform trans = transform();
    trans.translate( center.x(), center.y());
    trans.rotateRadians(rotation() + resultAngle, Qt::ZAxis);
    trans.translate( -center.x(),  -center.y());
    setTransform(trans);
}

void oval::setPositionGrabbers()
{
    QRectF tmpRect = rect();
    cornerGrabber[GrabberTop]->setPos(tmpRect.left() + tmpRect.width()/2, tmpRect.top());
    cornerGrabber[GrabberBottom]->setPos(tmpRect.left() + tmpRect.width()/2, tmpRect.bottom());
    cornerGrabber[GrabberLeft]->setPos(tmpRect.left(), tmpRect.top() + tmpRect.height()/2);
    cornerGrabber[GrabberRight]->setPos(tmpRect.right(), tmpRect.top() + tmpRect.height()/2);
    cornerGrabber[GrabberTopLeft]->setPos(tmpRect.topLeft().x(), tmpRect.topLeft().y());
    cornerGrabber[GrabberTopRight]->setPos(tmpRect.topRight().x(), tmpRect.topRight().y());
    cornerGrabber[GrabberBottomLeft]->setPos(tmpRect.bottomLeft().x(), tmpRect.bottomLeft().y());
    cornerGrabber[GrabberBottomRight]->setPos(tmpRect.bottomRight().x(), tmpRect.bottomRight().y());
}

void oval::setVisibilityGrabbers()
{
    cornerGrabber[GrabberTopLeft]->setVisible(true);
    cornerGrabber[GrabberTopRight]->setVisible(true);
    cornerGrabber[GrabberBottomLeft]->setVisible(true);
    cornerGrabber[GrabberBottomRight]->setVisible(true);

    if(m_actionFlags == ResizeState){
        cornerGrabber[GrabberTop]->setVisible(true);
        cornerGrabber[GrabberBottom]->setVisible(true);
        cornerGrabber[GrabberLeft]->setVisible(true);
        cornerGrabber[GrabberRight]->setVisible(true);
    } else {
        cornerGrabber[GrabberTop]->setVisible(false);
        cornerGrabber[GrabberBottom]->setVisible(false);
        cornerGrabber[GrabberLeft]->setVisible(false);
        cornerGrabber[GrabberRight]->setVisible(false);
    }
}

void oval::hideGrabbers()
{
    for(int i = 0; i < 8; i++){
        cornerGrabber[i]->setVisible(false);
    }
}
myvector.zip
Рекомендуем хостинг TIMEWEB
Рекомендуем хостинг TIMEWEB
Стабильный хостинг, на котором располагается социальная сеть EVILEG. Для проектов на Django рекомендуем VDS хостинг.

Ол саған ұнайды ма? Әлеуметтік желілерде бөлісіңіз!

2
Evgenii Legotckoi
  • Қар. 9, 2017, 1:15 Т.Қ.

You forgot Q_OBJECT macros in oval.h. Therefore you could not build project.

class oval : public QObject, public QGraphicsEllipseItem
{
    Q_OBJECT

...
    c
    • Қар. 9, 2017, 2:17 Т.Қ.

    Thank you very much sir,Now program is running without any errors.but problem is which can't draw a oval shape using mouse as your project.this image shows how my program is running.but problem is which cannot draw oval shape,can you tell me what is the reason.please check my sample project,thank you!!!



      Пікірлер

      Тек рұқсаты бар пайдаланушылар ғана пікір қалдыра алады.
      Кіріңіз немесе Тіркеліңіз
      AD

      C++ - Тест 004. Указатели, Массивы и Циклы

      • Нәтиже:50ұпай,
      • Бағалау ұпайлары-4
      m
      • molni99
      • Қаз. 26, 2024, 1:37 Т.Ж.

      C++ - Тест 004. Указатели, Массивы и Циклы

      • Нәтиже:80ұпай,
      • Бағалау ұпайлары4
      m
      • molni99
      • Қаз. 26, 2024, 1:29 Т.Ж.

      C++ - Тест 004. Указатели, Массивы и Циклы

      • Нәтиже:20ұпай,
      • Бағалау ұпайлары-10
      Соңғы пікірлер
      ИМ
      Игорь МаксимовҚар. 22, 2024, 11:51 Т.Ж.
      Django - Оқулық 017. Теңшелген Django кіру беті Добрый вечер Евгений! Я сделал себе авторизацию аналогичную вашей, все работает, кроме возврата к предидущей странице. Редеректит всегда на главную, хотя в логах сервера вижу запросы на правильн…
      Evgenii Legotckoi
      Evgenii LegotckoiҚаз. 31, 2024, 2:37 Т.Қ.
      Django - Сабақ 064. Python Markdown кеңейтімін қалай жазуға болады Добрый день. Да, можно. Либо через такие же плагины, либо с постобработкой через python библиотеку Beautiful Soup
      A
      ALO1ZEҚаз. 19, 2024, 8:19 Т.Ж.
      Qt Creator көмегімен fb3 файл оқу құралы Подскажите как это запустить? Я не шарю в программировании и кодинге. Скачал и установаил Qt, но куча ошибок выдается и не запустить. А очень надо fb3 переконвертировать в html
      ИМ
      Игорь МаксимовҚаз. 5, 2024, 7:51 Т.Ж.
      Django - Сабақ 064. Python Markdown кеңейтімін қалай жазуға болады Приветствую Евгений! У меня вопрос. Можно ли вставлять свои классы в разметку редактора markdown? Допустим имея стандартную разметку: <ul> <li></li> <li></l…
      d
      dblas5Шілде 5, 2024, 11:02 Т.Ж.
      QML - Сабақ 016. SQLite деректер қоры және онымен QML Qt-та жұмыс істеу Здравствуйте, возникает такая проблема (я новичок): ApplicationWindow неизвестный элемент. (М300) для TextField и Button аналогично. Могу предположить, что из-за более новой верси…
      Енді форумда талқылаңыз
      m
      moogoҚар. 22, 2024, 7:17 Т.Ж.
      Mosquito Spray System Effective Mosquito Systems for Backyard | Eco-Friendly Misting Control Device & Repellent Spray - Moogo ; Upgrade your backyard with our mosquito-repellent device! Our misters conce…
      Evgenii Legotckoi
      Evgenii LegotckoiМаусым 24, 2024, 3:11 Т.Қ.
      добавить qlineseries в функции Я тут. Работы оень много. Отправил его в бан.
      t
      tonypeachey1Қар. 15, 2024, 6:04 Т.Ж.
      google domain [url=https://google.com/]domain[/url] domain [http://www.example.com link title]
      NSProject
      NSProjectМаусым 4, 2022, 3:49 Т.Ж.
      Всё ещё разбираюсь с кешем. В следствии прочтения данной статьи. Я принял для себя решение сделать кеширование свойств менеджера модели LikeDislike. И так как установка evileg_core для меня не была возможна, ибо он писался…

      Бізді әлеуметтік желілерде бақылаңыз